daewoo Solar 140LC-V — Working in Water

15. Do not operate travel lever quickly when traveling in high range. A. Avoid sudden starts. B. When traveling in one direction come to a complete stop before reversing directions. Do not rock excavator back and forth with levers. C. Avoid sudden stops. Return levers to neutral by hand. Do not let them snap back to neutral on their own. 16. If the optional long fronts or attachments or heavy duty front end attachments are used, the machine balance will be altered. Follow these additional operating precautions. ARO0810L Figure 63 WARNING! Do not travel downhill with the front end attachments raised. Do not travel across slopes; travel straight up or down slope.

Use extreme caution when swinging the upper frame when positioned on a slope. Allow extra swing stopping room. The additional momentum generated by the longer or heavier front end equipment will increase the amount of time needed to stop the swing motion. Make sure that all optional equipment has been authorized and installed properly. 17. Do not move dirt or objects by swinging the excavator into them. This can result in structural and mechanical failures. WORKING IN WATER IMPORTANT When working in water, do not exceed a slope of more than 15°. If the slope is over 15°, the rear part of the upper structure will be immersed in water, resulting in radiator fan damage.

HAOB830L Figure 64 022-00058E Operation and Maintenance Manual Operation 3-29