3-36 Operation 022-00058E Operation and Maintenance Manual HYDRAULIC OIL AND FILTER SERVICE INTERVALS When using a hydraulic breaker, the viscosity breakdown and contamination of hydraulic oil is faster because the work condition is more severe than during normal digging work. To prevent the hydraulic components (especially pump) from having a shortened life-cycle, replace the hydraulic oil and main hydraulic oil filter using the following schedule.
Attachment Operation Rate Hydraulic Oil Filter Bucket Work 100% 2,000 Hours 250 Hours (First Replacement) 500 Hours (After First Replacement) Hydraulic Breaker Work 100% 500 Hours 100 Hours 100 105 551 106 110 614 80 (%) 112 130 692 RATE FILTER 60 119 150 (First Replacement) 782 OPTION 128 180 893 HYDRAULIC OIL 137 210 1028 40 FILTER BREAKER 156 250 (After First Replacement) 1196 175 300 1400 20 206 370 1658 0 0 500 1000 1500 2000 MACHINE OPERATING HOURS ARO0990L Figure 79 NOTE: The replacement intervals of hydraulic oil and filter depend upon the amount of time the hydraulic breaker is being used. These intervals should be followed as opposed to regularly scheduled maintenance.
10 5 5 51 106 1 10 614 112 1 30 692 119 F 150 (F ILTER plac ement ) 782 irst Re 128 180 893 137 210 10 28 HY DRAU LIC OIL 156 250 FIL (Aft TER rst Re place ment ) 1196 er Fi 175 30 0 1400 20 6 370 1 658