4-6 Inspection, Maintenance and Adjustment 022-00058E Operation and Maintenance Manual LUBRICANT MANUFACTURER HYDRAULIC OIL* ENGINE OIL** LUBRICANT GREASE GEAR OIL DRYDEN PARADENE AW 32 (BELOW 0°C (32°F)) or AW 46 (ABOVE 0°C (32°F)) DIESELALL PLUS 15W40 EP #2 (RED) AP80W90 CHEVRON AW MV 32 (BELOW 0°C (32°F)) or AW MV 46 (ABOVE 0°C (32°F)) DELO 400 15W40 DELO GREASE EP-2 DELO GEAR OIL or RPM UNIV GEAR 80W90 TEXACO RANDO HD32 (BELOW 0°C (32°F)) or HD46 (ABOVE 0°C (32°F)) URSA SUPER PLUS 15W40 or URSA PREMIUM TDX 15W40 STAR PLEX 2 STAR PLEX PREMIUM MULTIGEAR EPSAE 80W90 IDEMITSU KOSAN DAPHNE KOSAN 46WR APOROIL MOTIRE S300 DAPHNE CORRONE #2 APOROIL GEAR HE 90 NIPPON SEIKIYU SUPER HIGHLAND S26 or 32 LIPANOC GREASE NISEKI SP90 or EP90 TOTAL TOTAL EQUIVIS ZS46-III TOTAL TOTAL MUTRIS EP #2 TOTAL DA80W90 * Hydraulic oil change interval is 2,000 hours, only when Daewoo Genuine Oil is used.
If other brands of oil is used, guaranteed change interval is 1,000 hours. ** Engine oil must meet ACEA-E2, ACEA-E3 or API-CH-4 EQUIVALENT and be SAE 15W40 or 10W40. Antifreeze Recommended Concentration Manufacturers Meeting ASTM D3306 50% Antifreeze - 50% Distilled Water Dexcool ELC by Chevron Texaco Alugard G48 by BASF Others meeting or exceeding ASTM D3306 IMPORTANT Do not mix oils from different manufacturers. Daewoo does not endorse specific brands but does suggest that owners select quality oils whose suppliers provide assurance that required standards will always be met or exceeded.
Fluctuating daily or weekly extremes of temperature, or operation in sub-zero freezing weather may make it impractical to use straight weight lubricants. Use good judgement in selecting lubricant types that are appropriate for climate conditions.