REPLACE OUTER AND INNER AIR CLEANER FILTERS WARNING! Never clean or attempt to remove the air cleaner filter if the engine is running. NOTE: Replace inner filter whenever a new outer filter is installed. 1. Open the access door at the rear of the cabin. Figure 61 2. Remove the wing nut and air cleaner cover. 3. Remove the wing nut and outer filter from the air cleaner housing. 4. Clean the air cleaner cover and the inside of the air cleaner housing. 5. Remove wing nut and inner filter. 6. Clean out inside of air cleaner housing. Do not use compressed air to blow out housing. 7. Install new inner filter, and secure it into position with wing nut. Do not clean and re-use inner filter. 8.
Install new outer filter, and secure it into position with wing nut. 9. Install air cleaner cover. NOTE: Make sure that all gaskets on wing nuts and cover are properly installed and seated. Figure 62 4-36 Inspection, Maintenance and Adjustment 022-00058E Operation and Maintenance Manual