FUSES 1. The fuses in the fuse box are used to protect the various electrical circuits and their components from damage. See Figure 90. The fuses used are standard automotive type fuses. O X 2. The section on “Fuse Identification” on page 4-61, lists the circuits and the fuse amperage required for each circuit. If a fuse blows, determine the cause and repair any faults or failures. HAOC670L 3. Do not insert a higher amperage fuse into a lower amperage slot. Serious damage to the electrical components or fire can result. Figure 90 CAUTION! Before replacing a fuse, be sure to turn starter switch to "O" (OFF) position.
Fuse Boxes There are two fuse boxes (1 and 2, Figure 91) on the left side of the heater box. Fuses prevent electrical devices from overloading or shorting. A decal attached to the inside of the fuse box's cover indicates the function and amperage of each fuse. 1 Spare fuses are mounted on the inside of fuse box's cover. 2 Change a fuse if the element separates. If the element of a new fuse separates, check the circuit and repair the circuit. CAUTION! ARO0620L Figure 91 Always replace fuses with the same type and capacity fuse that was removed. Otherwise, electrical damage could result. 4-60 Inspection, Maintenance and Adjustment 022-00058E Operation and Maintenance Manual