daewoo Solar 140LC-V — 2. Fuel Gauge

FUNCTIONAL CHECK When the engine starter switch is turned to the "I" (ON) position, all bands of gauges, indicator lights of switches/buttons and indicator/warning lights will turn "ON" and the alarm buzzer will sound for about 2 seconds. During this time, a moving excavator will appear on the digital clock and graphic information area (3 and 4, Figure 23). 1. ENGINE COOLANT TEMPERATURE GAUGE RED The colored bands indicate the temperature of the engine coolant. H GREEN WHITE ZONE - Indicates temperature is lower than the normal operating temperature. WHITE GREEN ZONE - Indicates temperature is within the normal operating range. C RED ZONE - Indicates temperature is too high.

ARO0140L During operation, the bands must be in the green zone. Figure 24 If the band in the red zone starts to blink, a warning buzzer will sound and the engine speed will be automatically reduced. At this time, allow the engine to run at low idle speed until the temperature gauge registers in the green zone again. When the green zone is reached, shut down engine. Check the coolant level, for a loose fan belt, inspect for debris around radiator and so on. When the temperature reaches the normal range, the engine speed will automatically recover. 2. FUEL GAUGE Shows remaining fuel quantity in tank. GREEN GREEN ZONE - Indicates a normal fuel quantity.

F RED ZONE - Indicates that the fuel level is low. RED If the band in the red zone starts to blink, add fuel immediately. E Check the fuel level on smooth, level ground. ARO0150L Figure 25 022-00058E Operation and Maintenance Manual Operating Controls 2-15