2. FAN SPEED SELECTOR SWITCHES These switches are used to control the speed of the blower fan. A. "LO" Switch - Used for low speed. B. "MID" Switch - Used for intermediate speed C. "HI" Switch - Used for high speed. NOTE: If you do not select a blower speed the heater and air conditioner will not work. ARO0520L Figure 63 3. TEMPERATURE CONTROL SWITCH The temperature control consists of 24 stages. An LED is turned "ON" for every three stages. Whenever pushing it, it changes in stages. Pushing it continuously, it changes continuously. A. "COOL" Switch - Lowers the temperature. B. "WARM" Switch - Raises the temperature. LED COLOR STATUS ARO0530L Figure 64 Green LED - Air conditioner.
Full green, maximum operation of air conditioner. Red LED - Heater. Full red, maximum operation of heater. When the unit is used only for air conditioning, push the "A/C" switch and make all the LEDs fully green by pressing the "COOL" switch. When the unit is used only for heat, make the LEDs fully red by pressing the "WARM" switch. The "A C" switch has to be turned "OFF." To set the desired temperature of air coming out of the air outlets, turn the "A/C" switch "ON" and combine red LEDs with green LEDs by pressing the temperature control switch. The more LEDs in the green range that turn "ON," the cooler the temperature will become.
The more LEDs in the red range that turn "ON," the warmer the temperature will become. 2-32 Operating Controls 022-00058E Operation and Maintenance Manual