5 & 6.AUTO MEMORY AND PRESET SCAN BUTTON / PRESET STATION BUTTON Preset Scan To hear the preset station stored on the preset buttons, press the preset scan button (5) for less than 2 seconds. In FM band (FM1or FM2), all of the preset stations stored on the preset buttons 1 through 6 in the FM1 or FM2 band will be turned in for about 5 seconds each in turn. In AM or LW band, all of the preset stations stored on the preset buttons 1 through 6 in the AM or LW band will be turned in for about 5 seconds each in turn. While operating this function, the relevant frequency and preset button number will be flashed on the LCD.
After scanning all of the preset stations, this function is automatically cancelled and the station you heard before operating this function is turned on. When desired station is turned on, press this button again or the corresponding preset button to stop the scan function. Auto Memory 1) Select the desired band using the band selector button (3). 2) Press the auto memory button (5) for more than 2 seconds. Then, the strongest available stations are automatically stored on the preset buttons 1 through 6 in sequence. 3) After storing, all of the preset stations are scanned in sequence for 5 seconds each, and the station you heard before this function is automatically tuned in.
Manual Memory 1) Select the desired band using the band selector button (3) 2) Turn in the desired station using tuning up/down button (4). 3) Press one of 6 preset buttons (6) for more than 2 seconds, The preset button number will be displayed on the LCD, then the station will be stored in the memory. By the same way, you can store the desired stations into the 6 preset buttons.(6). 7. TAPE SLOT Press the power button (1) to turn the audio system on. Insert a cassette tape fully into the cassette slot with the exposed tape side facing the right. Then the player starts playback and "PLAY" signal appears on the LCD. 8. TAPE EJECTION BUTTON To eject the tape, press the tape eject knob (8).
Then, the mode is automatically transferred to the radio. 2-38 Operating Controls 022-00058E Operation and Maintenance Manual