SEAT ADJUSTMENT WARNING! Whenever the operator or operating condition has changed, check to see that the seating position is suitable for the condition at hand. Always fasten your seat belt while operating vehicle. Adjust the backrest so that the operator can fully reach and operate the pedals. When setting the safety lever to the "LOCK" position, first make sure the left arm rest is completely raised to the upright position. ARO0690L Figure 82 1. FORWARD / BACKWARD ADJUSTMENT (FIGURE 83) Holding lever (1, Figure 83), raise it up, while pushing or pulling the seat to desired position. Release lever once desired position is reached. Adjustment range is 160 mm (6.3 in) 2 4 3 2.
ADJUSTING THE SEAT'S TILT AND SEAT HEIGHT (FIGURE 83) 5 ARO0700L 1 Forward Tilt Figure 83 Push lever (2, Figure 83) down to adjust the angle of the front of the seat. Rear Tilt Pull lever (2, Figure 83) up to adjust the angle of the rear of the seat. Seat Height It is possible to move the seat up or down by combining adjustments forward and rear tilt. Adjust the seat according to operator's size and work conditions. Height adjustment is 60 mm (2.4 in). 3. WEIGHT ADJUSTMENT (FIGURE 83) Turning knob (3, Figure 83) to right makes the suspension harder. Turning knob to left makes the suspension softer. Adjust according to operator's weight by checking the weight indicator dial.
Adjustment range is from 50 - 120 kg (110 - 265 lb). 4. ADJUSTING RECLINING (FIGURE 83) Pulling up the right lever (4,Figure 83) allows the seat backrest to be moved forward or backward. 022-00058E Operation and Maintenance Manual Operating Controls 2-45