Caterpillar — Coupling Identification

Coupling Identification Thread Guide NPTF (1) JIC 37° SAE 45° ORFS (2) STOR (3) NPSM (4) SAE INV.

(5) BSP (6) GAZ (7) THREAD THREAD THREAD THREAD THREAD THREAD THREAD THREAD THREAD THREAD DASH SIZE SIZE SIZE SIZE SIZE SIZE SIZE SIZE SIZE SIZE (in-TPI) (in-TPI) (in-TPI) (in-TPI) (in-TPI) (in-TPI) (in-TPI) (in-TPI) (dia x pitch) -2 1 / 8 - 27 5 / 16 - 24 5 / 16 - 24 -- 5 / 16 - 24 1 / 8 - 27 5 / 16 - 28 1 / 8 - 28 -- -3 -- 3 / 8 - 24 3 / 8 - 24 -- 3 / 8 - 24 -- 3 / 8 - 24 -- -- -4 1 / 4 - 18 7 / 16 - 20 7 / 16 - 20 9 / 16 - 18 7 / 16 - 20 1 / 4 - 18 7 / 16 - 24 1 / 4 - 19 -- -5 -- 1 / 2 - 20 1 / 2 - 20 -- 1 / 2 - 20 -- 1 / 2 - 20 -- -- -6 3 / 8 - 18 9 / 16 - 18 5 / 8 - 18 11 / 16 - 16 9 / 16 - 18 3 / 8 - 18 5 / 8 - 18 3 / 8 - 19 M20 x 1.5 -8 1 / 2 - 14 3 / 4 - 16 3 / 4 - 16 13 / 16 - 16 3 / 4 - 16 1 / 2 - 14 3 / 4 - 18 1 / 2 - 14 M24 x 1.5 -10 -- 7 / 8 - 14 7 / 8 - 14 1 - 14 7 / 8 - 14 -- 7 / 8 - 18 5 / 8 - 14 M30 x 1.5 -12 3 / 4 - 14 1 1 / 16 - 12 1 1 / 16 - 14 1 3 / 16 - 12 1 1 / 16 - 12 3 / 4 - 14 1 1 / 16 - 16 3 / 4 - 14 M36 x 1.5 -14 -- 1 3 / 16 - 12 1 1 / 4 - 12 -- 1 3 / 16 - 12 -- -- -- -- -16 1 - 11 1 / 2 1 5 / 16 - 12 1 3 / 8 - 12 1 7 / 16 - 12 1 5 / 16 - 12 1 - 11 1 / 2 -- 1 - 11 M45 x 1.5 -20 1 1 / 4 - 11 1 / 2 1 5 / 8 - 12 -- 1 11 / 16 - 12 1 5 / 8 - 12 1 1 / 4 - 11 1 / 2 -- 1 1 / 4 - 11 M52 x 1.5 -24 1 1 / 2 - 11 1 / 2 1 7 / 8 - 12 -- 2 - 12 1 7 / 8 - 12 1 1 / 2 - 11 1 / 2 -- 1 1 / 2 - 11 -- -32 2 - 11 1 / 2 2 1 / 2 - 12 -- -- 2 1 / 2 - 12 2 - 11 1 / 2 -- 2 - 11 -- (1) NPTF - NATIONAL PIPE TAPERED FUEL (REF.

SAE J476) (2) ORFS - O-RING FACE SEAL (REF. SAE J1453) (3) STOR - SAE STRAIGHT THREAD O-RING (REF. SAE J514) (4) NPSM - NATIONAL PIPE STRAIGHT MECHANICAL (5) SAE INV. - SAE INVERTED FLARE (REF.

SAE J512) (6) BSP - BRITISH STANDARD PIPE (7) GAZ - FRENCH METRIC GAZ SAE CODE 61* SAE CODE 62** Caterpillar FLANGE HEAD HEAD HEAD HEAD HEAD HEAD HEAD HEAD HEAD HEAD HEAD HEAD DASH SIZE SIZE THKNS THKNS SIZE SIZE THKNS THKNS SIZE SIZE THKNS THKNS SIZE (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) -8 1.19 30.2 .265 6.7 1.25 31.8 .305 7.8 -- -- -- -- -12 1.50 38.1 .265 6.7 1.63 41.3 .345 8.8 1.63 41.3 .560 14.2 -16 1.75 44.5 .315 8.0 1.88 47.6 .375 9.5 1.88 47.6 .560 14.2 -20 2.00 50.8 .315 8.0 2.13 54.0 .405 10.3 2.13 54.0 .560 14.2 -24 2.38 60.3 .315 8.0 2.50 63.5 .495 12.6 2.50 63.5 .560 14.2 -32 2.81 71.4 .375 9.5 3.13 79.4 .495 12.6 3.13 79.4 .560 14.2 * All CODE 61 flange head hose couplings and adapter fittings meet or exceed SAE J518 CODE 61 requirements for hydraulic split flange connections.

The CODE 61 flange head design can withstand a maximum operating pressure of 3000 to 5000 psi depending on size. -40 3.31 84.1 .375 9.5 -- -- -- -- -- -- -- -- ** All couplings having Caterpillar flange heads meet or exceed the performance requirements of SAE J518 CODE 62 specifications for hydraulic split flange connections. The thickness of Caterpillar flange heads is greater than CODE 62 so that special split flanges are required for proper installation. The CODE 62 flange head design can withstand a maximum operating pressure of 6000 psi regardless of size. Note1: Reference charts on pages 165-170 for split flange part numbers. Note 2:

SAE CODE 61, DIN Form R, and JIS Type I couplings are interchangeable except for bolt sizes. Note 3: SAE CODE 62, DIN for S, and JIS Type II couplings are interchangeable except for bolt sizes 18 Head Thickness Head Size Flange Head Guide