Caterpillar — XT-3 ES Hose

XT-3 ES Hose MIN. MAX. MIN. HOSE HOSE HOSE BURST WORK. BEND PART I.D. DASH O.D. PRESS. PRESS.

RADIUS* NUMBER (in) (mm) SIZE (in) (mm) (psi) (kPa) (psi) (kPa) (in) (mm) 1650016 0.375 9.5 -6 0.80 20.2 16,000 112,000 4,000 28,000 2.50 64 1650017 0.500 12.7 -8 0.94 23.8 16,000 112,000 4,000 28,000 3.50 89 1650018 0.625 15.9 -10 1.08 27.4 16,000 112,000 4,000 28,000 4.00 102 1650020 0.750 19.1 -12 1.21 30.7 16,000 112,000 4,000 28,000 4.75 121 1650021 1.000 25.4 -16 1.50 38.1 16,000 112,000 4,000 28,000 6.00 153 1650023 1.250 31.8 -20 1.85 47.0 12,000 84,000 3,000 21,000 8.25 210 1650024 1.500 38.1 -24 2.11 53.5 10,000 70,000 2,500 17,500 10.00 254 1650025 2.000 50.8 -32 2.63 66.7 10,000 70,000 2,500 17,500 12.50 318 Construction:

Fabric reinforced, synthetic rubber tube; four plies of spirally-wrapped high tensile steel wire reinforcement, separated by layers of synthetic rubber. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Very high pressure service with petroleum base hydraulic fluids. MSHA approved cover. Temperature Range: -40° F to +250° F (-40° C to +121° C) Couplings: Collet-type reusable, skive type - pages 27-39 . Crimp-on permanent, skive type - pages 40-45 . For related assembly equipment and tooling, see pages 277-310 . NOTE: Hose cover needs to be removed before attaching couplings.

* CENTERLINE OF HOSE ** SOLD BY THE INCH 26 CAT 736 XT-3 ES XT-3 ES Hose (736)** Exceeds the requirements of SAE 100R12. XT-3 Hose Couplings Features (D) Multi-land Stem • Keeps fluid sealed in without inner liner damage and Benefits and provides a positive coupling to hose seal. EXCLUSIVE REUSABLE DESIGN (E) Hardened Steel Sleeve • No sleeve bend or distortion so the sleeve retains Reuse XT-3, XT-5, and XT-6 Hose Couplings over its original size and shape and can be reused. and over again for the lowest operating cost. In • Hose stays firmly compressed in coupling, further addition, you know you have the right coupling at aiding coupling retention. the right time.

(F) Precision Machined O-Ring Head (A) Slim, Collet-Type Style • To help eliminate hazardous fluid leaks and • No bolts or protrusions for easy installation, even provide positive coupling head seal. in cramped places. (G) Extruded Stem (B) Multi-land Fingers • Orients metal grain for more uniform strength and • Grip the wires on the skived hose solidly to fatigue resistance. prevent coupling blow-off and provide better • Braze joint between head and stem is eliminated coupling retention. resulting in leak free performance and excellent coupling assembly life.

(C) Tapered Fingers & Stem • Compressive force is slightly relieved so the hose (H) Extruded Collet can flex without failure at the rear of the coupling. • More uniform strength for excellent coupling This increases hose assembly life. performance after repeated reuse. warning! T INO J UA RVO Y I TD O S TE HR EIO OU PS E P RE AR TS OO RN AA NL D 1 ALWAYS match hose, stem assemblies and sleeves according to markings ( / + / UHP). EXTENSIVE DAMAGE TO THE EQUIPMENT, THE FOLLOWING 2 NEVER interchange XT-3 hose, stem assemblies and sleeves marked with PROCEDURES MUST BE OBSERVED.

a triangle ( ) with XT-5 hose, stem assemblies and sleeves marked with a FAILURE TO DO SO COULD RESULT plus (+) or XT-6 hose, stem assemblies and sleeves marked with UHP. IN PERSONAL INJURY. UHP UHP UHP XT-3 HOSE XT-5 HOSE XT-6 HOSE UHP