Current Hose Machines 150-2568 / 173-9805 XT Hose Machines • Assembles/disassembles all sizes of XT hose reusable couplings • Crimps most permanent couplings through 1.0" (-16) (See chart on pages 10 and 16) • Tooling is also used on 4C9900, 6V4800, 1U9160 XT Hose Machines • 173-9805 XT Hose Machine is for locations where “CE” * compliance is required Step 2 - Choose the power supply you need, and order the parts to connect the power supply to the hose machine. Step 2a: Order a power supply from the list below.
1/2 Horsepower • 2P5550 115V, 50/60Hz • 2P5500 230V, 50/60Hz 1 1/8 Horsepower • 3S6224 115V, 50/60Hz • 8S8033 230V, 50/60Hz 1 1/2 Horsepower • 1U5555 115V, 50/60Hz • 1U5565 230V, 50Hz • 4C5080 230/115V, 60Hz • 171-5397 230V, 50 Hz (CE) (A foot switch is included only with the 1 1/2 HP pumps.) Note: All pumps are single phase. 4C5080 features a quiet, low rpm induction motor. Step 2b: Order the list of parts below to connect the power supply to the hose machine. • 8F0024 Hose (2 required) • 136-2061 Fitting • 135-2535 Fitting (2 required) • 136-2068 Fitting • 135-2536 Fitting (2 required) • 1P2375 Coupler (2 required) • 136-2060 Fitting • 1P2376 Coupler (2 required) Note 1:
For “CE” machines, do not order 8F0024, 1P2375 or 1P2376. Order hose assembly 162-1410 (2). Note 2: If you need a gauge, other fittings are required. Use only 10,000 psi rated fittings. * The “CE” mark indicates compliance with applicable directives of the European Committee for Standards. 285