Current Hose Machines 150-3622 Bench Model Hose Machine • Crimps all permanent hose through 1.25" (-20) • Uses same spacer rings as XT Hose Machines • “CE” marked hydraulic power supply available Step 2 - Choose the power supply you need (shipped with oil). • 161-5717 115V, 60 Hz 1 Phase • 163-5309 230V, 50 Hz 1 Phase (CE) Step 3 - Choose the related tooling you need Step 3a: Order the required tooling below: 162-1410 Hose Assembly (1 Required) 123-9572, 134-9573, 134-9574, 134-9575, 134-9576, 134-9577, 134-9578, 134-9580, 134-2788 Spacer Rings 160-2275 Separator 157-6125 Stand (Optional) Step 3b: Choose the die groups you need from the selection below:
287 Type Dash# 294 716 844 XT3 XT5 XT6 1028 1543 1956 2760 -3 4C3668 -4 130-2185 130-2185 4C3669 144-4379 -5 130-2186 4C3671 144-4380 -6 130-2187 130-2187 130-5381 130-5388 4C3672 4C3675 129-9183 144-4381 -8 130-2188 130-2188 130-5382 130-5389 4C3673 4C3676 129-9184 144-4382 -10 130-2189 130-2189 130-5383 129-9185 -12 130-2190 130-2190 130-2190 130-5384 130-5386 130-5390 4C3674 4C3677 129-9186 -16 130-2191 130-2191 130-2191 129-9187 -20 130-2192 130-2192 130-2192 129-9188