Non-Current Hose Machines This section provides the serviceable parts for Caterpillar Non-Current Hose Machines 7S1100 Hose Machine • Assembles/disassembles all sizes of XT hose reusable couplings • Crimps most permanent couplings through 1.0" (-16) (See chart below) • These machines are non-current. Replacement parts listed below.
Available Replacement Parts • 4C6601 Stand • 5P5255 XT-5, XT-6 Reusable Coupling Tooling Group • 1U7614 Plate (for use with -6 and -8 bent stem and large head couplings) • 141-9718 Die Bowl • 136-3635 Sleeve • 8T5121 Plate • 1V9646 Pusher • 4C4375 Spring • 133-7362 Die Rest • 135-4561 Die Separator • 4C4625 Die Ring for 1543 • 8T5125 Die Ring for 1028 • 134-9572, 134-9573, 134-9574, 134-9575, 134-9576, 134-9577 and 134-9580 Spacer Rings for 294 and 844 .25" (6.4 mm) through 1.00" (25.4 mm) I.D. Hose Note: See page 296 for a complete list of part numbers included in the 7S1100 Hose Machine Group. See page 297 for a complete list of part numbers included in the 5P5255 Tooling Group.
This table shows the die groups available for the hose types and sizes that can be crimped using the 7S1100 hose machine. A complete listing of Caterpillar die groups is shown on page 301 . Replacement Power Supply: Pumps sold separately (Note: See page 302 for pump options) Reference Material SEHS6880-04 Special Instruction: Use of 7S1100 Hydraulic Press Arrangement - Reusable XT Hose Couplings Assembly and Disassembly SEHS8587-02 Special Instruction: Use of 7S1100 Hydraulic Press Machine - Permanent Hose Couplings Assembly. NEHS0664 Tool Operating Manual:
Crimping Caterpillar 294, 716, and 844 Hose and Couplings NEEG2736-03 Hose, Die Group, and DVDT Selection Chart for 7S1100, 6V4900, 4C9900, and 150-2568 Hose Machines NEEG2746 Crimp Diameter Chart 292 Type Dash# 294 716 844 XT3 XT5 XT6 1028 1543 1956 2760 -3 4C3668 -4 130-2185 130-2185 4C3669 144-4379 -5 130-2186 4C3671 144-4380 -6 130-2187 130-2187 130-5381 130-5388 4C3672 4C3675 129-9183 144-4381 -8 130-2188 130-2188 130-5382 130-5389 4C3673 4C3676 129-9184 144-4382 -10 130-2189 130-2189 130-5383 129-9185 -12 130-2190 130-2190 130-2190 130-5384 130-5386 130-5390 4C3674 4C3677 129-9186 -16 130-2191 130-2191 130-2191