XT-6 Hose CATERPILLAR XT-6 ® XT-6 Hose (1136)** Exceeds the requirements of SAE 100R15. MIN. MAX. MIN. HOSE HOSE HOSE BURST WORK. BEND PART I.D. DASH O.D. PRESS. PRESS. RADIUS* NUMBER (in) (mm) SIZE (in) (mm) (psi) (kPa) (psi) (kPa) (in) (mm) 6V1153 0.375 9.5 -6 0.89 22.6 24,000 168,000 6,000 42,000 5.98 152 6V1154 0.500 12.7 -8 0.98 25.0 24,000 168,000 6,000 42,000 7.99 203 5P8813 0.750 19.1 -12 1.38 35.0 24,000 168,000 6,000 42,000 10.51 267 5P8284 1.000 25.4 -16 1.61 41.0 24,000 168,000 6,000 42,000 12.99 330 5P8285 1.250 31.8 -20 1.97 50.0 24,000 168,000 6,000 42,000 17.52 445 Construction:
Fabric reinforced, synthetic rubber tube; six piles of spirally-wrapped high tensile steel wire reinforcement, separated by layers of synthetic rubber. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Extremely high pressure service with petroleum base hydraulic fluids. MSHA approved cover. Temperature Range: -40° F to +250° F (-40° C to +121° C) Couplings: Collet-type reusable, skive type - pages 77-79 . Crimp-on permanent, skive type - pages 80-82 . For related assembly equipment and tooling, see pages 277-310 . NOTE: Hose cover needs to be removed before attaching couplings.
XT-6 Hose Coupling Features and Benefits XT-6 Hose Couplings have the same advantages found with the XT-5 and XT-3 Hose Couplings, plus a heavier stem and head construction to handle 6000 psi (42,000 kPa) applications. * CENTERLINE OF HOSE ** SOLD BY THE CENTIMETER 2 warning! TO AVOID SERIOUS PERSONAL INJURY TO THE OPERATOR AND EXTENSIVE DAMAGE TO THE EQUIPMENT, THE FOLLOWING PROCEDURES MUST BE OBSERVED. FAILURE TO DO SO COULD RESULT IN PERSONAL INJURY. 1 ALWAYS match hose, stem assemblies and sleeves according to markings ( / + / UHP ).
NEVER interchange XT-3 hose, stem assemblies and sleeves marked with a triangle ( ) with XT-5 hose, stem assemblies and sleeves marked with a plus ( + ) or XT-6 hose, stem assemblies and sleeves marked with UHP . UHP UHP XT-3 HOSE XT-5 HOSE XT-6 HOSE 76 UHP