Caterpillar Hose (716, 294, 844) CATERPILLAR ! ® ! 716 ! One-Wire Braid Hose (716)** Exceeds the requirements of SAE 100R1 Type AT. Meets European standards for dynamic working pressures and temperatures of DIN 20022 1SN. Construction: Special high temperature synthetic rubber tube; single high tensile steel wire braid reinforcement. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Medium pressure service with high temperature petroleum base hydraulic fluids, hot oil, grease, lubricants, and crude oils. MSHA approved cover. U.S. Coast Guard 46CFR56.60-25C approved. Temperature Range: -40° F to +275° F (-40° C to +135° C) for petroleum based hydraulic fluids.
+185° F Max (+85° C Max) for air, water, or water-glycol. -40° F to +275° F (-40° C to +135° C) for petroleum based DIN hydraulic fluids. -40° to +158° F (-40° C to +70° C) for all other applications. Couplings: Crimp-on permanent, non-skive type - pages 87-114 . For related assembly equipment and tooling, see pages 277-310 . Note: Hose cover does not need to be removed before attaching couplings. * CENTERLINE OF HOSE ** SOLD BY THE INCH 84 MIN. MAX. MIN. HOSE HOSE HOSE BURST WORK. BEND PART I.D. DASH O.D. PRESS. PRESS. RADIUS* NUMBER (in) (mm) SIZE (in) (mm) (psi) (kPa) (psi) (kPa) (in) (mm) DIN 20022 1SN MAX. WORK. PRESS.
(psi) (bar) 1226867 0.250 6.4 -4 0.56 14.1 10,857 76,000 2,714 19,000 4.02 102 3263 225 1226869 0.375 9.5 -6 0.71 18.1 8,571 60,000 2,143 15,000 5.00 127 2610 180 1226870 0.500 12.7 -8 0.85 21.5 8,000 56,000 2,000 14,000 7.01 178 2320 160 1226871 0.625 15.9 -10 0.97 24.7 5,714 40,000 1,429 10,000 7.99 203 1885 130 1226872 0.750 19.1 -12 1.13 28.6 4,857 34,000 1,214 8,500 9.49 241 1523 105 1226873 1.000 25.4 -16 1.44 36.6 4,000 28,000 1,000 7,000 12.01 305 1276 88 1226874 1.250 31.8 -20 1.76 44.8 2,571 18,000 643 4,500 16.50 419 914 63 1226875 1.500 38.1 -24 2.05 52.0 2,000 14,000 500 3,500 20.00 508 725 50 1226876 2.000 50.8 -32 2.59 65.9 1,429 10,000 357 2,500 25.00 635 580 40