Caterpillar — Hydraulic Suction Hose (844)

Caterpillar Hose (716, 294, 844) CATERPILLAR ! ® ! 844 ! Hydraulic Suction Hose (844)** Exceeds the requirements of SAE 100R4. MIN. MAX. MIN. HOSE HOSE HOSE BURST WORK. BEND PART I.D. DASH O.D. PRESS. PRESS. RADIUS* NUMBER (in) (mm) SIZE (in) (mm) (psi) (kPa) (psi) (kPa) (in) (mm) 1226905 0.750 19.1 -12 1.37 34.9 1,143 8,000 286 2,000 5.00 127 1226906 1.000 25.4 -16 1.63 41.3 971 6,800 243 1,700 5.98 152 1226907 1.250 31.8 -20 2.00 50.8 800 5,600 200 1,400 7.99 203 1226908 1.500 38.1 -24 2.25 57.2 571 4,000 143 1,000 10.00 254 1226909 2.000 50.8 -32 2.75 69.9 400 2,800 100 700 12.01 305 Construction:

Special high temperature synthetic rubber tube; two textile fiber braids combined with wire spiraled throughout the textile reinforcement to prevent collapse under vacuum. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Hydraulic system suction or return lines with petroleum base hydraulic fluids. MSHA approved cover. U.S. Coast Guard 46CFR56.60-25C approved. Temperature Range: -40° F to +275° F (-40° C to +135° C) Couplings: Crimp-on permanent, non-skive type - pages 87-114 . For related assembly equipment and tooling, see pages 277-310 . Note: Hose cover does not need to be removed before attaching couplings. * CENTERLINE OF HOSE ** SOLD BY THE INCH 86