. OPERATION OPERATION ADJUSTING MIRROR WARNING comes into view. View Range to see hatched 3 - 83 Be sure t o adjust the mirrors before starting work. I f they are not adjusted properly, you cannot secur e the visibility and may be injured o r may injure someone seri Loosen mirror secu ring bolt (1), screw (2) and n ut (3) and adjust the mirror position the way it assures the best view from the operator's seat. Adjus t the positi on and angle of each mirro r so that it reflects a sight 200 mm a adjustment, ma bove the gr ke sure that p ound and up t art of the dum o 1500 mm. In p truck's image the also Mirror A: Must b Mirror B: Must b Mirror C: Must b Mirror D: Must b contact Mirror E:
Must b Mirror F: Must b contact Mirror A: Must b e possible to see front of m Mirror B: Must b e possible to see hatched Mirror C: Must b e possible to see hatched Mirror D: Must b e possible to see hatched portion (D), ground point of tire e possible to (D'), and grou see hatched nd surface (D") portion (E) e possible to point of tire ( see hatched F'), and groun portion (F), ground d surface (F") Rear monitor (if equipped): M ust be possi po rtion (G)