. OPERATION OPERATION 3 - 103 OPERATION USING DIFFERENTIAL LO When trave ling on roads su ch as soft ground, ste ep uphill road, etc. w here the tires a re likely to slip, av oid sudden changes in speed, and use the differential locks (inter-axle differentia l lock, and left a nd right differenti al lock). Operate th e inter-axle differ ential lock switch an d the left and right dif ferential lock pe dal to actuate the differential lock at 5 to 10 m (16 ft 5 in t o 32 ft 10 in) before entering the roads w here the tires ar e likely to slip.
To make f ull use of the pe differential lock before the ti res slip NOTICE ssible, do not use the differential lock (inter-axle, left and right differential lock) when turning. xle differential lock is used when turning: difficult to operate the steering wheel. As far as po ssible, do not use t he differential lock (inte r-axle, left and right dif ferential lock) wh If the inter-a xle differential lock is used It will be difficult to operate t It will bec ome more inter-ax le difficult to turn than when the differential l ock is not used, a nd in some cases, it may not be possible to steer around cur ves which were previou sly possible. g:
If the left an d right differential l ock is used when turnin It will be difficult to operate t he steering wheel. It will bec ome more left and right difficult to turn tha n when the differential lock is not used, and in some cases, i t may not be possible to steer around cur ves which were previou sly possible. When the left and right differ ential lock is actuated, the wheel on the inside of the curve attem pts to turn at the sa me speed as the wheel on the outside, so the wheel may spin an d there may be premat ure wear of the tir e or damage to the r oad surface.
When tra veling on dry road s or other road surface s where the friction in dex is high, if the left and right differe ntial lock is actuated, caused b lock slips the differential loc k will slip in order to a bsorb the difference in rotating speed b etween the left and right wheels y turning, and this w ill reduce the durability of the differential lock . Noise will also b e generated when th e differential . When the left and right differ ential lock is actuated, the load on the final dr ive increases, and this may reduce th e service life of the fin al drive.