. OPERATION OPERATION DUMP OPERATIONS WARNING 3 - 107 When dumping a load, alw accordance with the signals f ays perform the dumping operation in rom the flagman. perate the dump body slowly. hile it is still raised. When dumping large rocks, o Do not load the dump body w When performing inspection with the dump body raised, always use the body pivot pins, set the dum p lever to the HOLD position an d loc k it securely. For details, see "BO DY PIVOT PIN (PAGE 3-46)". Operate the dump body as f ollows. 1. 1. Place gear shift lever (1) at N (neutral) position, and s et parking brake switch (2) to PARK ING position. 2. Move dump lever (3) to RAISE position, then depress the e the dump body.
he accelerator pedal to rais If the dump lever is relea sed when it is at RAISE position, i t is held at RAISE position an d the dump body will continue to ri se. The dumping speed inc speed. reases in proportion to the engine engine 3. When the dump body rise s to the previously set position , dump lever (3) returns to HOL D position. The dump body is held at that position. If it is necessary to raise the dump body further, operat e dump lever (3) to RAISE posi tion and the dump body w ill rise. If dump lever (3) is release d, dump lever (3) will retur n to HOLD position and the dump b ody will stop at that positio n.