Komatsu — METHOD OF LOWERING DUMP BODY IN EMERGENCY

. OPERATION TROUBLESHOOTING IF TRANSMISSION HAS TROUBLE tank 4. Tighten grip (5) and locknut (4) and install cover (2). when the above 3 - 128 If th e transmission has any trouble, operate the machine according t o the fol lowing pro Decelerate the mac place. Set the gear shift l hine with the brake and stop it on a safe ever to N (neutral) position, then set the h to PARKING position. safe parking brake switc h to PARKING position. In some trouble mo des, the gear is not shifte d even if the gear shift lever is operat ed. m the following procedure. In this case, perfor m the following procedur 1) When the starti started, discon (No.

A1 (female connect (insert) 2) Set the parking 3) Operate the gea place without d ng switch is at ON positio n or the e ngine is nect (pull out) emergen cy connecto r (1) ), A1 (male), white 1-pin connector), then again. brake switch to TRAVEL position. then brake switch to TRAVEL position r shift lever to move the machine to a safe epressing the accelerato r pedal. If th e gear shift lever is o perated with the acceler ator pedal depressed , the em ergency es cape function will n ot work. In a ddition, the emerge ncy escape function may not work for some f ailure co des.

Whi le the emergency es cape function is working , the shift indicator of the mac hine monit or displays "E" and the shift ran ge (gear speed) of t he transmission alternat ely. METHOD OF LOWERING DUMP BODY IN EMERGENCY Wh en the dump body n eeds to be lowered to the seat whi le the engin e canno t be started for some trouble, perform the following procedure . Remove cover (2) f rom the rear of hydraulic tank (1). Loosen locknut (4) of manual lower valve (3 Turn grip (5) of valv e (3) counterclockwise. The oil in the hoist and the dump body If the dump body does not go down even method is used, co nsult your Komatsu distri