. OPERATION TROUBLESHOOTING STARTING THE ENGINE CAUTION DISCONNECTING THE BOOSTER CABLES terminal of the problem machine. 3 - 136 Make sure that t he parking brake switch is at PARKING position and t he gear shift lever is at N (n eutral) position for both normal machine a nd th e problem machine. 1. Make sure the clips are firmly co nnected to t he battery ter minals 2. Start engi ne of the n ormal machine and run it at High idle (MAX) 3. Turn the s tarting sw itch of the fa iled machine to START p osition and start the eng If the engi ne doesn' t start at first , try again af ter 2 minutes or so.
After the engin e has star ted, disconnect the boos ter cables in t he reverse of the order in which they were connected. 1. Remove 1 clip of boo ster cable ( B) from the e ngine block o problem m achine. 2. Remove th e other cli p of booster cable (B) fro m the negativ terminal of the norm al machine. 3. Remove 1 clip of booster cab terminal of the norm al machine. 4. Remove th e other cli p of booster cable (A) fro m the positiv