Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE inside. cup (4) is at the 4 - 24 7. Blow dry co mpressed air (0.2 MPa {2.1 kg/cm2 }, 30.0 PSI) from the inside of outer ele ment (6 ) along t he pleats. Next, blow from 8. After cleani ng, shine a light bu lb from in side o uter elemen t (6) to check. I replace outer elem 9. Install oute r element ( 6) in the air clean er bod 10. Check that O-ring (9) i s fitted to dust cu Next, set s o that vacuator va lve (8) of dust bottom, an d insert it in to the a ir cleaner body. 11. Clip hooks (5) of dust cup (4) to the pro trudin g parts of th e air cleaner bod y to lock in positio