Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF FOOT BRAKE WARNING CHECK BRAKING CAPACITY OF RETARDER BRAKE WARNING 4 - 51 If the mac hine move s, it will lead to serious injur y. If machine begins to move during the inspection of braking capacity, lower the engine sp eed immediately, set g ear shift lever a t N (neutral) position, and then set parking brake swi Check th e braking capacity o f the foot bra ke as f ollow s. 1. Stop 2. Set s spee spee 3. Low posit If an repa 1. Stop the machine on flat g round and de press servic e brake (1). hift lever d. If the d reache (2) to the machine d s 1300 rpm D position, gra oes not move , it is normal.

dually raise the engine even when the engine er the engine speed, set shifting lever at N (neutral) ion, and then set parking brake at PARKING position. y abnormality is found, ask your Komatsu distributor for ir. NOTICE There is d anger of da mage inside the transmissi on, so a lways do this with the gear shift lever at "D"po sition. Do not use any other position. If the mac hine move s, it will lead to serious injur y. If machine begins to move during the inspection of braking capacity, lower the engine sp eed immediately, set s hifting lever at N position, an d then depress the foot brake. Check th e braking capacity o f the retarder brake as fo llows. 1. Stop (1) fu 2. Set s spee spee 3.

Low any the machine on flat ground and pull retarder control lever lly. hift lever (2) to the D position, gradually raise the engine d. If the machine d d reaches 1300 rpm er the engine speed oes not move , it is normal. , set gear shi even when the engine ft lever at N position. If problem i s found, as k your Komat su distributo r for repair. NOTICE There is d anger of da mage inside the transmissi on, so a lways do this with the gear shift lever at "D"po sition. Do not use any other position.