. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING the top the plug OIL 4 - 81 EVERY 2000 HOURS SERVICE Maintenan ce for every 50, 250 , 500 an d 1000 hours serv ice shoul d be carried out at the same time. Immediat ely after the e ngine is stopped, its parts and oil are s till very ho t, and may cause burn in jury. Accordingly, wai t until they have cooled down before s tarting t he work. If there is still pressure r emainin g inside t he case, the oil or plu g may fly o ut. Turn the plug slowly to release the pressure , then remove it Refill amount of oil:
F ront lef t, right 6 .5 liters (1.72 US g al) each enter l eft, right 5.5 liter s (1.45 US gal) eac ear left , right 7.0 liters (1.85 US gal) each 1. Stop th e machine s o that t he TOP and dra in plug (P) i s at the bottom. 2. Remov again. 3. Add oil through the hole for plug (G ) to the specified l 4. After ad ding oil, che ck that the oil i s at the s pecified le "CHEC K OIL LEV 4-57)". DRIVE (PAGE 5. Repeat the procedu re in steps 1 - 4 and change the oil final dri ve cases (fr ont, center, rea