Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CLEAN HYDRAULIC TANK STRAINER WARNING it in CLEAN TRANSMISSION CASE STRAINER WARNING before starting the "CHANGE OIL IN out the 4 - 85 Immediat ely after the engine is stopped , its parts and oil are s till very hot, a nd may cause burn inju ry. Accordingly, wait until they have cooled do wn before starting the work. If there is still pressur e remaining inside the case, the oil or plu g may fly out. Turn the plug slowly to release the pressure, then remove it carefully. 1. Remov e plug (1) of the strainer (2 places) inside the wheel. e strainer out from strainer case (2), then w iesel fuel. 2. Take th clean d iesel fuel. 3.

Assem ble the str ainer to strainer c ase (2), then install Immediat ely after the engine is stopped , its parts and oil are s till very hot, a nd may cause burn inju ry. Accordingly, wait until they have cooled do wn before starting the work. If there is still pressur e remaining inside the case, the oil or plu g may fly out. Turn the plug slowly to release the pressure, then remove it carefully. Drain operation. For de tails, see Sectio TRANSMISSION CA SE (PAGE 4-65) 1. Remov e bolt (1), then remove cover (2) and take . strainer 2. Remov e any dirt s tuck to the strainer, t hen wash in clea fuel or f lushing oi l. If the strainer is damaged, replace 3.

Install t he straine rs in their origina l positio n.