Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS PARKING BRAKE SWITCH WARNING This switch (8) is used to actuate and release the parking brake valve. 3 - 35 When parking o r leaving the mach ine, always apply the parki ng brak (a): P he parki ng brake is appli (b): T ravel he parki ng brake is relea When the sw itch is set to PARKING position, the parking brake ts up.

pilot l amp ligh When the swi tch is set to PAR KING position, i f the gea r shift l ever is at any posi tion other than N (neutral), the centraliz lamp will flash and the alarm b uzzer will soun If the pressure saved in the acc umulator drops and goe s below 5.4 MPa {55 kg/cm 2, 781 P SI}, t he brake and p arking brake are aut omatically applie d. For details o f the met hod of releasin g the brak e, see " WHE N PARKING B RAKE HAS BEEN A CTUATED IN E MERGENCY (P AGE 3-1 32)".

When workin g at night, the sy mbol inside the switch lig hts up regardless of the s elected posi tion of the switc REMARK s stopped with the parking brake switch at TRAVEL, the parking brake will be applied automatically If the engine i s stopped with t he parking brak e switch at TRAVEL , the parking b rake wi applied automatically even though t he parking brak e switch is at T RAVEL. When starting t he engine again, oper ate the brake switc h to PAR KING, and then move it back to TRAVE L to cancel the parking br ake. NOTIC E Durin g loading operations, do not apply the parkin g brake. A pply the retarder brake