142 BASIC SERVICE Note: VCS coolant is used to protect the cooling system. 1 Close the shut-off valve on the coolant pump housing. Remove and Replace Note: In the closed position, the pin on the shut-off valve should be horizontal. 2 Place a suitable container below the filter to collect spilled coolant. 4 Apply a light film of coolant on the face of the new filter gasket. 3 Using filter wrench J 48061 or equivalent, unscrew the filter and discard it safely. 5 Screw the new filter on the threaded nipple extending from the mounting flange. 6 Using the filter wrench, tighten the filter one full turn after the gasket contacts the base. 7 Open the shut-off valve on the coolant pump housing.
8 Check for any coolant leaks.