volvo — PV776-QRG07-MP8.pdf

BASIC SERVICE 149 Installation 2. Align the locator tab located on the bottom of the DPF filter module with the slot located in the top of the catalytic filter module. Install the DPF filter module onto the catalytic filter module and secure the modules together using a V-band clamp tightened to specification. 1. Install a new gasket between the catalytic filter module and the DPF filter module. 3. Install a new gasket between the outlet module and the DPF filter module. W2033384 4. With assistance, use a suitable lifting device to install the outlet module onto the DPF filter module. Ensure that the differential pressure tube does not become damaged during outlet module installation. Note:

Make sure the high-temperature gasket remains in place and has not become dislodged. 5. Install the V-band clamp to secure the outlet module to the DPF filter module and tighten clamp fasteners to specification. All clamps should now be aligned and tightened. 6. Install the pressure differential tube to the port on the catalytic filter module and tighten the fitting securely. Note: A high-temperature anti-seizing compound should always be applied to the threads of the sensors, plugs or fittings in the exhaust system to avoid component seizure or corrosion.