SPECIFICATIONS 11 Engine Specification Weights and Dimensions Item Specification Engine type In-line direct injection diesel Number of cylinders 6 Displacement 13 L Swept volume 12.78 L Cylinder bore and stroke 131 x 158 mm (5.16 x 6.22 inches) Emissions level EPA 07 (2.5g NOx; 0.1g Pt) maximum Fuel system Electronic unit injector Valve actuation Single overhead camshaft, four valves per cylinder Aspiration Variable geometry turbocharger with sliding nozzle ring Cylinder and piston type Wet Sleeve; one-piece steel piston Electronic control Electronic management system Emission controls Cooled EGR; Diesel Particulate Filter (DPF) Peak power ratings 335–485 hp Peak torque ratings 1830–2237 Nm (1350–1650 ft-lb) Low idling 10 rps (600 rpm) Fast idling 35.8 rps (2150 rpm) Maximum full load revolutions 31.7 rps (1900 rpm) Weight (production engine without vehicle details) (production engine with vehicle details) 1,115 kg (2456 lb) 1,143 kg (2518 lb) Firing order 1-5-3-6-2-4 Compression ratio 16:1 Fasteners and threads Metric Flywheel housing (standard) Aluminum Total length 1366 mm (54 inches) Total width 971 mm (38 inches) Total height 1281 mm (50 inches)