Glossary 171 Electronic Unit Injector (EUI) Controlled electronically by the EECU, there is one electronic unit injector for each cylinder of an engine. A unit injector incorporates the pump, the injector nozzle and two solenoids in a single body. Actuated by the camshaft via rocker arms with roller followers, electronic unit injectors offer precise fuel metering using a process called "rate shaping." Engine Electronic Control Unit (EECU) A microprocessor-based controller usually mounted on the engine block. On the engine, a cooling plate mounts on the surface of the module. A tube on the plate conducts fuel drawn from the tank on its way to the pump before being pressurized.
The fuel acts as the coolant. The EECU controls fuel timing and delivery, exhaust gas recirculation, fan operation, engine protection functions and engine brake operation. Exhaust Aftertreatment System (EATS) Equipment installed to remove the maximum amount of noxious emissions from the exhaust gases after they leave the combustion chamber before they reach the atmosphere. This includes exhaust gas recirculation (EGR), the variable geometry turbocharger (VGT), the discharge recirculation valve (DRV), the aftertreatment fuel injector (AFI) and the diesel particulate filter (DPF).
Exhaust Gas Recirculation (EGR) A system whereby a pre-determined amount of exhaust gas is returned to the combustion chambers. Adding a small percentage of exhaust gas to the fuel/air mixture lowers the combustion temperature reducing the formation of nitrogen oxides (NOx). Hydrocarbons (HC) Chemical compounds composed only of carbon and hydrogen. Gasoline, diesel fuel and motor oil are all examples of a very large group of hydrocarbons. The largest source of hydrocarbons is petroleum. Idler Gear A gear running between a driving and a driven gear to make the driven gear rotate in the same direction as the driving gear.