16 SPECIFICATIONS Tightening Torques and Patterns Sensors and Wiring Harness CAUTION Overtorquing a sensor or sensor mounting screw can result in sensor breakage or thread damage Sensors Air Pressure / Temperature, Inlet Manifold 3.3 N.m (29 lb-in) Camshaft Position 8 ± 2 N.m (6 ± 1 lb-ft) Coolant Level (surge tank) Plug-in Coolant Temperature (front, right side of cylinder head) 22 ± 3 N.m (16 ±2 lb-ft) Crankcase Position / Engine Speed 10 ± 1 N.m (7±1 lb-ft) Crankcase Pressure (block, front of air compressor) 30 ± 5 N.m (22 ± 4 lb-ft) Fuel Pressure ((fuel filter housing) 25 ± 3 N.m (18.5 ± 2 lb-ft) Oil Level / Temperature, (inside sump) standard torque Oil Pressure (block, front of air compressor) 30 ± 5 N.m (22 ± 4 lb-ft) Turbocharger Wheel Speed 8.5 N.m (75 lb-in) Water -in-Fuel (on Fuel / Water Separator) 1.7 ± 10.6 N.m (15±5 lb-in) Wiring Harness Attaching Screws 24 ± 4 N.m (18 ± 3 lb-ft)