22 SPECIFICATIONS Flywheel Housing W2032456 T2025683 Step 1: Tighten all M14, M10, M8 bolts..................................24 ± 4 Nm (18 ± 3 ft-lb) Step 2: Tighten all bolts in numerical order to the following torque: M14 bolts (1–7) ................................................................140 ± 20 Nm (103 ± 15 ft-lb) M10 bolts (8–11).......................................................................48 ± 8 Nm (36 ± 6 ft-lb) M8 bolts (12–22) ......................................................................24 ± 4 Nm (18 ± 3 ft-lb) Note: Apply sealant in a 2 mm (0.079 inch) thick bead as illustrated.