SPECIFICATIONS 75 Flywheel, Mounted Flywheel Housing, Mounted Crankshaft 1 The measurements refer to lubricated components.
Axial runout (manual transmission) measurement radius 150 mm (5.91 inches) Less than 0.21 mm (0.008 inch) Axial runout of contact surface against clutch housing 0.2 mm (0.008 inch) maximum Radial runout of guide against clutch housing 0.26 mm (0.010 inch) maximum T2012873 Wear value Crankshaft axial clearance1 0.4 mm (0.016 inch) maximum Machining value Main bearing and connecting rod bearing journal out-of-round 0.006 mm (0.0002 inch) maximum Main bearing and connecting rod bearing journal taper 0.02 mm (0.0008 inch) maximum Runout of middle bearing 0.15 mm (0.006 inch) maximum