TROUBLESHOOTING POWER TRAIN TROUBLE SHOOTING POWER TRAIN TROUBLE SHOOTING If something is wrong with the power train, the master system warning indicator starts blinking and the error code shown in the following table is displayed on the LCD. The error code indicates the location of the trouble. If an error code appears, immediately contact your local KUBOTA Dealer for repairs.
(1) Master system warning indicator (2) Error code 138 M5091N, M5101N Displayed er- ror code (DBM) Trouble Displayed er- ror code (DBM) Trouble [ERROR-1] Acceleration sensor (main) trouble [ERROR-19] PTO shift switch signal error [ERROR-2] Acceleration sensor (sub) trouble [ERROR-21] Range gear shift (Hi) switch trouble [ERROR-3] Acceleration sensor main/sub phase shifting trou- ble [ERROR-22] Main gear shift (6th) switch trouble [ERROR-4] Shuttle sensor (main) trouble [ERROR-23] Shuttle rotating sensor trouble [ERROR-5] Shuttle sensor (sub) trouble [ERROR-24] Machine speed sensor trouble [ERROR-6] Shuttle sensor main/sub phase shifting trouble [ERROR- ENG] [(ERROR-41)] Engine communication trouble [ERROR-7] Shuttle sensor signal trouble [ERROR-8] Gear lock signal trouble [ERROR- ECU] [(ERROR-43)] ECU communication trouble or meter communica- tion trouble [ERROR-11] Rear PTO solenoid trouble [ERROR-12] 4-wheel-drive solenoid trouble [ERROR-60] Analog reference supply voltage +5 V trouble [ERROR-13] Bi-speed turn solenoid trouble [ERROR-63] Acceleration & engine adjustment trouble [ERROR-14] Shuttle forward solenoid trouble [ERROR- NET] Communication trouble [ERROR-15] Shuttle reverse solenoid trouble