IMPLEMENT LIMITATIONS IMPLEMENT LIMITATIONS The tractor has been thoroughly tested for proper performance with implements sold or approved by Kubota. Use with implements which are not sold or approved by Kubota and which exceed the maximum specifications listed in the following table, or which are otherwise unfit for use with the tractor may result in malfunctions or failures of the tractor, damage to other property and injury to the operator or others. Any malfunctions or failures of the tractor resulting from use with improper implements are not covered by the warranty. NOTE : Implement size may vary depending on soil operating conditions.
Strictly follow the instructions outlined in the operator's manual of the mounted or trailed machinery or trailer, and do not operate the combination tractor-machine or tractor-trailer unless all instructions have been followed. Forestry application Following hazards exist: toppling trees, primarily in case a rear-mounted tree grab-crane is mounted at the rear of the tractor. penetrating objects in the operator's enclosure, primarily in case a winch is mounted at the rear of the tractor. Optional equipment such as operator protective structure (OPS), falling object protective structure (FOPS), and so on, to deal with these hazards and other related hazards are not available for this tractor.
Without such optional equipment, use is limited to tractor specific applications like transport and stationary work. 24 M5091N, M5101N Tread (max. width) Lower link end max. lifting capacity: W0 Front Rear 1165 mm 1385 mm 2300 kg Actual figures Implement weight: W1 Max. drawbar load: W2 Trailer loading weight: W3 As in the following list (See IMPLEMENT SPECIFICATION TABLE on page 25.) 1000 kg 5000 kg W0 Lower link end max, hydraulic lifting capacity W1 Implement weight - the implement's weight which can be put on the lower link W2 Max. drawbar load W3 Trailer loading weight - the max. loading weight for trailer