Kubota — Battery

Maintenance - 66 SK800 Operator’s Manual Procedures p Check 1. Disconnect battery at battery disconnect switch, if equipped. 2. Ensure no ignition sources are near battery. 3. Loosen and remove battery cable clamps carefully, negative (-) cable first. 4. Clean cable clamps and terminals to remove dull glaze. 5. Check for signs of internal corrosion in cables. 6. Connect battery cable clamps, positive (+) cable first. 7. Tighten any loose connections. t46om007w.eps 8. Ensure that battery tiedowns are secure. 9. Turn battery disconnect, if equipped, on.