Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK BEFORE STARTING CHECK COOLANT LEVEL, ADD WATER WARNING NOTICE tank (1) is filled to a level 2. After adding coolant, tighten the cap securely. there is probably coolant level of the water in the table in "CLEAN INSIDE OF then add coolant to the 3 - 86 Be sure to c heck the items listed here before starting the engine fo D o no t ope n the radiator cap unless nec essary. Wait for the engine to c ool down before chec king the coolant in the su b-tank. I mmediatel y after the engine is stopped, the coolant is at a high temperature and the radiator is under high internal pr essure.

the cap is removed to check the coola nt level in this condition, there is a hazard of burns. Wait for the temperatur e to go own, then turn the cap slowly to releas e the pressure before removing If th e volume of coolant added is more tha n usual, check for possible wate Confirm that t 1. Confirm between and fill co between that the coolant in sub FULL and LOW. If the lev olant through the water fil FULL and LOW. 3. If th e su b-tank becomes empty, leakage. After checking, repair any no abnormality is found, check th radiator. If it is low, add coolant of t accordin g to the coolant density ta COOLIN sub-tank