Komatsu — OTHER TROUBLE

. OPERATION TROUBLESHOOTING 3 - 188 Problem Main causes Remedy Even when brake pedal is depressed, braking effect is poor Worn lining Oil leakage in brake piping Defective brake valve Defective piston seal ( ( ( ( Check, repair) Check, repair) Check, repair) Replace) Brake is dragging or always applied Cleaning Poor braking effect of parking brake ( Adjust) ( Finish surface of disc with sandpaper) ( Finish surface of disc with sandpaper) Blade moves up and down excessively during operation Adjust shim. For details, see EVERY 250 HOURS SERVICE. Adjust shim at circle guide connector. For details, see EVERY 500 HOURS SERVICE.

Replace guide bushing,shim Correct blade rail Rotation of blade during operation is excessive Adjust position of guide connector. For details, see EVERY 500 HOURS SERVICE. Work equipment does not move properly when work equipment control lever is operated Add oil to specified level. For details, see EVERY 250 HOURS SERVICE. Heat generated from parking brake disc Brake pad in contact with disc ( Adjust clearance)