Komatsu — GUIDES TO MAINTENANCE

. MAINTENANCE GUIDES TO MAINTENANCE 4 - 3 Dusty worksites: as follows: onitor frequently to see if the dust indicator is clogged. shorter interval than specified. to avoid clogging. quently. ecially the starting motor and alternator, to avoid accumulation of dust. When working at dusty worksites, do Inspect the air cleaner clogging m onitor frequently to see if the dust indicator i s clogged Clean the air cleaner element at a Clean the radiator core frequently Clean and replace the fuel filter fre Clean electrical components, esp ecially the starting motor and alternator, to a void a ccumulat ion of dust.

When inspecting or changing the oil, move the machine to a place that is free o f dus t to preve nt dirt from getting into the oil. Avoid mixing oils: If a different brand or grade of oil has to be added, drain the old oil and replace all t he oil with the n ew brand or grade of oil. Never mix different brand or gr ade of oil. Locking inspection covers: Lock inspection cover securely into position with the lock bar. If inspection or maintenance is performed with with inspection cover not locked in positio n, there is a danger that it may be suddenly blow shut by th e win d and cause injury to the worker. Bleeding air from hydraulic circuit:

When hydraulic equipment has been repaired or replaced, or the hydraulic piping has bee n removed and installed again, the air must be bled from the circuit. Precautions when installing hydraulic ho ses: where there are O-rings or gasket seals, clean the mounting surface, and forget to assemble the O-rings and gaskets. When removing parts at locations replace with new parts. When doing this, be careful not to forget to assemble the O-rings and gaskets When installing the hoses, do not twist them or bend them sharply. If they are installed so, th eir service life will be shortened extremely and they may be damaged. surface, and Checks after inspection and maintenance :

If y ou forget to perform the checks aft er inspection and maintenance, unexpected p roblems may o ccur, and this may lead to serious injury or property dam age. Always do the following: e stopped) enance points been forgotten? nance items been performed correctly? Checks after operation (with engin Have any inspection and maint Have all inspection and mainte Have any tools or parts been d inside the machine and get cau Are there any leakage of coola Have any inspection and maint Have all inspection and mainte Have any tools or parts been d ropped inside the machine? It is particularl y dangerous if parts are dropped ght in the lever linkage mechanism. nt or oil?

Have all nuts and bolts been tightened? en operating the engine, see "TWO WORKERS FOR INSPECTION AND NE IS RUNNING (PAGE 2-34)" and pay careful attention to safety. ance items working properly? el when the engine speed is raised? Are there any leakage of coola nt or oil? Have all nuts and bolts been tightened? Checks when operating engine For details of the checks wh MAINTENANCE WHEN ENGI Are the inspection and mainten Is there any leakage of oil or fu For details of the checks wh SPECTION NE IS RUNNING (PAGE 2-34)" and pay careful a ttention to safet Are the inspection and mainten Is there any leakage of oil or fu