Komatsu — RECOMMENDED FUEL, COOLANT, AND LUBRICANT

. MAINTENANCE RECOMMENDED FUEL, COOLANT, AND LUBRICANT Sulfur content (%) Oil change interval Less than 0.5 500 hours 1.0 and up Not recommendable (*) 0.5 to 1.0 250 hours * If these fuels are used, there is danger that serious trouble may occur because of early deterioration of the engine oil or early wear of the internal parts of the engine. If the local situation makes it necessary to use these fuels, always remember the following. 1) Be sure to check Total Basic Number (TBN) of oil frequently by TBN handy checker etc., and change oil based on the result. 2) Always be aware that oil change interval is extremely shorter than standard.

3) Be sure to carry out periodic engine inspection by distributor's expert since change interval of periodic replacement parts and overhaul interval are also shorter. 4 - 10 RECOMMENDED FUEL, COOLANT, AND LUBRICANT Komats u genuine oils ar e adjusted to m aintain the r eliabili ty and du rability o f Komat and com ponents In order to keep instructi ons in thi s Opera tion and Mainte Failure t o follow th e Oper ation and Maint enance Manual ma y result in shorten ed life or excess wear of the engine, power tr ain, cooli ng syste m, and/or othe r components.

Commercially av ailable l ubricant additi ves may be good machine Komats u does no t recommend any com mercially available lubrican t additive Use the oil recommende d according to t he ambient temperature in the chart Specifie d capacit y mean s the total amo unt of oil including the oil in the tank and the piping.

Refill amount of oil means t he amou nt of oil needed to refill the system during inspectio n and m aintena When st arting th e engine in temperatur es below 0° C (32° F), be su re to use the rec ommended even if t he ambie nt temperature may be come highe r durin g the cou rse of th If the m achine is operate separate Komats u distribu When th e fuel su given in this Operation an d Maintenanc If the fue l sulfur c ontent i s more than 0.5 %, change the oil accordin g to the f ollowing