. MAINTENANCE STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS TORQUE LIST CAUTION Apply the following table for Hydraulic Hose. 4 - 13 If nuts, bolts, or other parts a re no t tightened to the specified torque, i t wil l cause looseness or dam age to the tightened part s, and this will cause f ailure of the machine or problems with operation. Always pay c areful a ttention whe n tightening p arts Unless otherwise specifie d, tighten the metric nuts and bolts to t he torque shown in th e table below. If it is n ecessary to replac e any nut or bolt, always use a Komatsu genuine part of the sa me size as the part tha t was replaced.
Thread diameter of bolt (a)(mm) Width across flats (b)(mm) Tightening torque Target value Service limit Nm kgm lbft Nm kgm lbft 6 8 10 12 14 10 13 17 19 22 13.2 31 66 113 177 1.35 3.2 6.7 11.5 18 1 9.8 23.1 48.5 83.2 30.2 11.8 to 14.7 27 to 34 59 to 74 98 to 123 157 to 196 1.2 to 1.5 2.8 to 3.5 6.0 to 7.5 10.0 to 12.5 16.0 to 20.0 8.7 to 10.8 20.3 to 25.3 43.4 to 54.2 72.3 to 90.4 115.7 to 144.7 16 18 20 22 24 24 27 30 32 36 279 382 549 745 927 28.5 2 39 2 56 4 76 5 94.5 6 06.1 82.1 05.0 49.7 83.5 245 to 309 343 to 425 490 to 608 662 to 829 824 to 1030 25.0 to 31.5 35.0 to 43.5 50.0 to 62.0 67.5 to 84.5 84.0 to 105.0 180.8 to 227.8 253.2 to 314.6 361.7 to 448.4 488.2 to 611.2 607.6 to 759.5 27 30 33 36 39 41 46 50 55 60 1320 1720 2210 2750 3280 135.0 9 175.0 1 225.0 1 280.0 2 335.0 2 76.5 265.8 627.4 025.2 423.1 1180 to 1470 1 1520 to 1910 1 1960 to 2450 2 2450 to 3040 2 2890 to 3630 2 20.0 to 150.0 55.0 to 195.0 00.0 to 250.0 50.0 to 310.0 95.0 to 370.0 868.0 to 1085.0 1121.1 to 1410.4 1446.6 to 1808.3 1808.3 to 2242.2 2133.7 to 2676.2 Nominal - No.
of threads (a) Width across flats (b) (mm) Tightening torque Target value Permissible range Nm kg m lbft Nm kgm lbft 9/16 -18UNF 19 44 4 .5 32.5 35 to 63 3.5 to 6.5 25.3 to 39.8 11/16 -16UN 22 74 7 .5 54.2 54 to 93 5.5 to 9.5 39.8 to 68.7 13/16 -16UN 27 103 1 0.5 75.9 84 to 132 8.5 to 13.5 61.5 to 97.6 1 -14UNS 32 157 1 6.0 115.7 128 to 186 13.0 to 19.0 94.0 to 137.4 13/16 -12UN 36 216 2 2.0 159.1 177 to 245 18.0 to 25.0 130.2 to 180.8