. MAINTENANCE SERVICE PROCEDURE CLEAN RADIATOR FINS AND COOLER FINS WARNING CLEAN FINS BY ROTATING COOLING FAN IN REVERSE rotating the fan in reverse. 2. Open covers (3) on the right and left sides of the machine. FAN REVERSING METHOD 4 - 31 If compre ssed air, pressurized water, o r steam hits your body directly , or cause s dirt to fly, it may lead to p ersonal injury. Always wear safe ty glasses, dust mask, or oth er protective equipment. Clean th e radiator fins if any mud or dirt is stuck to the radiat NOTICE When rot ating the fan in reverse, be c areful of flying dust, and be ca reful not to let any cloth get caught in the fa n.
Dust may rise, so check that there is n o one in the surrounding area when On jobsi tes where it is easy for dirt to stick to the radiator or co oler, turn coo ling fan reverse rotation s witch (1) ON to rotate the fa n in reverse. This will blow off the dirt and dust stuck to the radiat or or cooler, a nd can extend the cleanin 1. Ope n engine side covers (1) o hine and fix them by using NOTICE rotate the fan in reverse when carrying out the operation. Never rotate the fan in reverse whe Before operating the fan reverse ro tation switch, run the engine a t low idle. 1. Set t he gear shift lever to the P (PARKING) position and apply the 2. Run the engine at low idle. 3.
Pres s position (A) of cooling fa n reverse rotation switch ( REMARK The coo ling fan switches to the rev erse rotation once pressing the cooling fan reverse rotation swit continue to press, release the swit