. MAINTENANCE SERVICE PROCEDURE CHECK OF INFLATION PRESSURE OF TIRES AND INFLATION OF THEM WARNING Tire size Inflation pressure: kPa{kg/cm 2 , PSI} 14.00-24-12PR 275 {2.75, 39.1} 14.00-24-14PR 300 {3.00, 42.6} 14.00R24TG A 400 {4.00, 56.8} 17.5R25TG A 300 {3.00, 42.6} NOTICE The optimum inflation pressure differs according to the type of work. For details, see "HANDLING THE TIRES (PAGE 3-168)". 4 - 38 When inflating a tire, che ck that no one will enter the working are a. Use an air chuck which has a cli p and which can be fixed to t he air valve . While inflating the tire , check the inflation pressure occasional ly so t hat it will not rise too high .
If the rim is not fitted n ormally, it may be broken an d scattered while the tire is inflated. To ensu re safety, place a guard arou nd the tire a nd do not work in front of the ri m but work on the tread side of the tire. f the rim Abnormal drop of inf lation pressure and abnorm al fitting o rim indicate trouble in the tire or rim. In this case, be su re to ask a t ire repair shop to carry out repa irs. e specified inflation pressure. ation pressure of the tires just after high-speed ork.
Be sure to observe th e specified inflation pressure Do not adjust the infl travel or heavy-duty w CHECKING Measure the inflation pressure with a tire press ure gauge , whil e the tires are cool, before s INFLATION OF TIRES ssure properly. Adjust the inflation pre When inflating a tire, u se an air chuck which ca n be fixed to th e air valve of the tire as sho wn in the figure. Do not work in front of the rim but work on the tread sid e of the ti The proper inflation pr essure is shown below.