SK600 Operator’s Manual Service - 59 Service Precautions p Welding Precaution NOTICE: Welding can damage electronics. Welding currents can damage electronic components. Always disconnect the ECU ground connection from the frame, harness connections to the ECU, and other electronic components prior to welding on machine or attachments. Connect welder ground close to welding point and make sure no electronic components are in the ground path. Disconnect battery at battery disconnect switch before welding to prevent damage to battery. Never turn off battery disconnect switch with engine running, or alternator and other electronic equipment devices may be damaged. Washing Precaution NOTICE:
Water can damage electronics. When cleaning equipment, do not spray electrical components with water. Working under Raised Lift Arms Raised component. Crushing can cause death or serious injury. Stay away or secure raised component with locking device. Use correct equipment and procedures. Pin safety supports as shown when working under raised lift arms. t35om037w.eps