Ditch Witch SK600 — Fuel Hose

SK600 Operator’s Manual Service - 71 Procedures p Fluid , Hydraulic NOTICE: Change every 250 hours if jobsite temperature exceeds 100°F (38°C) more than 50% of the time. Check before startup and every 10 hours. Change every 600 hours. Check 1. Check level at sight glass (2). 2. Add THF at fill (1) as needed to keep level at halfway point on sight glass. Change 1. Remove plug (3) to drain. 2. Install plug. 3. Add THF at fill to keep level at halfway point on sight glass. Fuel Hose Check fuel hose (shown) and clamp bands every 50 hours. If clamp is loose, apply oil to the threads and retighten. If hose is worn, replace. Bleed fuel system if hose and/or clamp is changed. 1 2 3 t35om029w.eps