Ditch Witch SK600 — SK600

Specifications - 80 SK600 Operator’s Manual SK600 p Auxiliary: double gear pump 22.7L/min 22.7L/min 207bar Ground drive: dual hydrostat Battery SAE reserve capacity 85min, SAE cold crank @ 0°F (-18°C) 525amp, 12V electrical system Vibration Levels Average vibration transmitted to the operator’s hand during normal operation with a loader bucket is 6.5m/sec 2 . Average vibration transmitted to the whole body during normal operation with a loader bucket is 0.81m/sec 2 . Actual vibration will depend on the attachment being used. Noise Level This machine can generate sound levels exceeding 80dBA. Always wear appropriate hearing protection when operating machine.

Find sound power and pressure information at www.ditchwitch.com, or contact customersupport@ditchwitch.com. Specifications are called out according to SAE recommended practices. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not match that shown. Hydraulic System US Metric Flow rate (pump 1) 6.0gpm Flow rate (pump 2) 6.0gpm Pressure 3000psi Flow rate 12.5gpm 47.2L/min Pressure 3625psi 250bar Fluid Capacities US Metric Fuel tank 10.5gal 40L Engine oil, with filter 3.9qt 3.7L Hydraulic reservoir 9.2gal 35L