38 Operation Section Engine Diagnostics i00160113 Customer Specified Parameters SMCS Code: 1000; 1900; 1901; 1902 Customer specified parameters that will enhance the fuel efficiency and the operator’s convenience can be programmed into the Electronic Control Module (ECM). Some parameters may affect engine operation. This may lead to complaints from the operator about power or about performance. The following engine related parameters may be programmed by the customer by using Caterpillar electronic service tools in order to influence the operation of the engine: Customer Passwords Power Rating (hp at rpm) Rating Selection (A-E) Air/Fuel Ratio PTO Ramp Rate Engine Parameters:
Low Idle, High Idle, Top Engine Limit, Torque Limit, and Intermediate Speed Engine Monitoring Mode Equipment ID Maintenance Indicator Auxiliary Pressure Auxiliary Temperature Parameter Lock Out The customer specified parameters can be changed as often as needed. Password protection is provided so that the customer can change the parameters. The customer can authorize someone else to change the parameters. Ensure that a record of the parameters is kept in the Operation and Maintenance Manual. For detailed instructions on programming the engine for optimum performance and for optimum fuel economy, consult your Caterpillar dealer.