70 Maintenance Section Cooling System Specifications Table 29 Equation For Adding The SCA To Conventional Coolant/Antifreeze At The Initial Fill Table 32 V Ч 0.045 = X V is the total volume of the cooling system. X is the amount of SCA that is required. Table 30 is an example for using the equation that is in Table 29. Note: Specific engine applications may require maintenance practices to be periodically evaluated in order to properly maintain the engine’s cooling system. Table 30 Table 28 lists part numbers and quantities of SCA that is available from your Caterpillar dealer.
Cleaning the System of Heavy-Duty Coolant/Antifreeze Adding the SCA to Conventional Coolant/Antifreeze For Maintenance Caterpillar cooling system cleaners are designed to clean the cooling system of harmful scale and corrosion. Caterpillar cooling system cleaners dissolve mineral scale, corrosion products, light oil contamination and sludge. Heavy duty coolant/antifreeze of all types REQUIRE periodic additions of an SCA. Clean the cooling system after used coolant is drained or before the cooling system is filled with new coolant. Test the coolant/antifreeze periodically for the concentration of SCA.
For the interval, see the Operation and Maintenance Manual, “Maintenance Interval Schedule” (Maintenance Section). SCA test kits are available from your Caterpillar dealer. Test the concentration of SCA or submit a coolant sample to your Caterpillar dealer. See this publication, “S·O·S Coolant Analysis” topic (Maintenance Section). Clean the cooling system whenever the coolant is contaminated or whenever the coolant is foaming. For the recommended service interval, refer to the Operation and Maintenance Manual, “Maintenance Interval Schedule” for your engine. Additions of SCA are based on the results of the test or based on the results of the coolant analysis.
The size of the cooling system determines the amount of SCA that is needed. Use the equation that is in Table 31 to determine the amount of Caterpillar SCA that is required, if necessary: Table 31 Equation For Adding The SCA To Conventional Coolant/Antifreeze For Maintenance V Ч 0.014 = X V is the total volume of the cooling system. X is the amount of SCA that is required. Table 32 is an example for using the equation that is in Table 31.
Example Of The Equation For Adding The SCA To Conventional Coolant/Antifreeze For Maintenance Total Volume of the Cooling System (V) Multiplication Factor Amount of SCA that is Required (X) 946 L (250 US gal) × 0.014 9 L (4 US gal) Example Of The Equation For Adding The SCA To Conventional Coolant/Antifreeze At The Initial Fill Total Volume of the Cooling System (V) Multiplication Factor Amount of SCA that is Required (X) 946 L (250 US gal) × 0.045 43 L (11 US gal)