. OPERATION OPERATION STARTING ENGINE NORMAL STARTING WARNING control dial (1) is operated engine parts, so set it to an 1. Turn fuel control dial (1) from the low idle (MIN) position to a slightly higher speed. (2) and turn the key to the 3 - 82 Sit dow n in the operator's seat before sta Do not attempt to start the engine by sho rt-circuiting the engine starting circuit. Such an act may cause serious bodily injury or fire. Check t hat there are no persons or obsta cles in the surrounding area, then soun d the horn and st art the engine Exhaus t gas is toxic.
When starting the e ngine in confined spaces, be particularl y careful to ensur NOTICE Do not continue to crank the starting mot 60 seco for at le Before nds under any circumstances. If t ast 2 minutes, then repeat the pro starting the engine, check that the idle (MI On this N) position. machine, to protect the turbochar provide d. In cold weather, even if fuel immedi ately after starting the engine, the for sev eral seconds. If the fu el control dial is in the FULL posit sudden ly and cause damage to the e diate or low speed position. interme 2. Inser T position. The engine will st